CONTACT INFO
Shenzhen Optlaser Technologies Co., Ltd
Tel: 86-755-88396091/ 83108613
Fax: 86-755-88396094
Email: info@optlaser.com
Add: 5rd floor, Building A, Libang Industrial Park, Xitian Village, Gongming Town, Guangming New District, Shenzhen, China.
RECENT POSTS
Project Details
This item is controlled under light sensitive. When the light sensor is covered or at night time, the laser light will automatically turn on When plug in power supply.
On the contrary, the laser light will be turned off.
NOTES:
Only use supplied power AC adapter connected to a properly grounded outdoor outlet.
Do not use with dimmers.
Operate in temperatures of -20℃~ 35℃（-4℉ ~ 95℉）. There will be a delay if operating at a temperature of -20℃(-4℉). Please allow up to 10 minutes for light to warm up and reach its full projection.
When handing the RG laser projector, for safety purposes it is recommended to mount using a sturdy handing clamp and safety cable
Normally, the projector could be on immediately when plug in power supply. But for sure of greater brightness and stable light output, the laser sources will extremely require a heat up time about 15 minutes（without heater-chip）, especially in the cold weather condition.
Optlaser wholly researched and developed the newest white laser projector.
The feature of this new item will bring hundreds brilliant white laser stars,create a visual “milky way”.
Motion speed is adjustable from low-medium-fast via the included IR remote controller.
Safety Notice:
This laser display device incorporates a CLASS 3A laser system which, by itself, may be hazardous. However, this laser display device incorporates a protective housing and diffractive holographic optics in the machine design such that there is no exposure or human access to laser radiation during operation or maintenance above the CLASS 3A limits. Each individual laser beam power is under 5mw which is less than a standard laser pointer.
Project Description
This laser display/projector device incorporates a CLASS 3A laser system, which by itself, may be hazardous. However, this laser display device incorporates a protective housing and diffractive holographic optics in the machine design such that there is no exposure or human access to laser radiation during operation or maintenance above the CLASS 3A limits. Each individual laser beam power is under 5mw which is less than a standard laser pointer. The laser emitting color will be red+green, the display mode can be switched from static and flashing, and built-in a timer chip for timer set at 2h, 4h, 6h and 8h light up, all mentioning functions can be controlled under a radar signal remote control.
Project Description
Product name:Single color and move series
Offering three colors for this series product
The image is move and you can control the speed
The holder and the stake make it easy to set up and use
Project Description
This product accepts digital control signals in protocol DMX512(1990).The amount of
lighting fixtures connected in parallel is no more than 32.Connect the DMX
controller’s Output to the first lighting fixture’s Input cable with a 2 core XLR signal cable(Shown as
above ),connect the first lighting fixture’s Output cable to the second lighting fixture’s Input
cable and connect the rest light fixtures in the same way.Eventually,connect the
last lighting fixture’s Output cable to a DMX terminator
ILDA control mode
Connect ILDA signal,the lighting fixtures will automatically switch over to ILDA working
mode.This lighting fixtures’ ILDA signal cable connection way is compliant to internationa standard.
